www.tutorialpsd.net

In the first part of this

Photoshop tutorial

We create a brush. We will use texture - in our case - earth, but you can also use, for
example, texture of stone, rust, peel. After creating our own brushes
we open up photo that we want to edit in Photoshop. Basically we need
to create two basic images which we will then combine together. First
we create an image with using a Photoshop tool – Brush. Here we want to
keep your attention – use smaller brush when you start painting detail.
As you can see further in this

Photoshop tutorial

We modify image into draw lines. Now we can let these images overlap
with blending modes. In this section of

Photoshop tutorial

You only choose from 5 modes and they are – Darken, Multiply, Color
Burn, Linear Burn, Darker Color. If the resulting effect is too
weak, duplicate layer and if it is strong, reduce opacity. Activate
last original layer and gradually begin to change the blend modes. You
will see how many opportunities there are to create new images with
this effect. Photoshop instruction is treated in detail and we have
explained all steps in this video.

Finally, we attach several pictures that were changed by this Adobe
video Photoshop tutorial – Painting with blending mode. This lesson has
many options for experimentation. This effect is excellent and
therefore you make sure do not miss this video.

www.tutorialpsd.net

In today’s

Photoshop video tutorial

We will show you a very simple method of balancing exposure between two parts of a photo. We will need two photographs of the same place – one overexposed and one underexposed. When shooting it is good to use a tripod, because we need photos which will be overlapping each other / not like in our case /. As you can see in this

Photoshop video tutorial

We open a darker picture and put it over a lighter one. We reduce the opacity so that we can place photographs on the right place. Then we add a layer mask. We will use Photoshop Gradient tool. The setup procedure and next process can be seen in this video lesson. This

Photoshop video tutorial

Will show you an easy way of how to improve exposure. The entire tutorial is  processed in detail and each step is explained. Be sure you also try this guide.

Finally, we attach a photo, which was created by editing the two images using this Adobe Photoshop video tutorial – Improve exposure. Watch this video lesson.

www.tutorialpsd.net

Photoshop tutorial,

Which you will watch is really very simple. With this guide, you can create circles of different sizes, types, colours, and then use these as Photoshop shapes, or brushes. It is again instruction, which is simple and offers experimentation. In whole

Photoshop tutorial

We will use the Line tool / of course you can also use another tool – eg. Pen / and then Photoshop filter – Polar coordinates. In Photoshop filter tick Rectangular to polar. The effect is than done.
Certainly it is good to change the width of the lines and use lines thicker than 5px. You can also change background colour. This

Photoshop tutorial

We certainly recommend for beginners as well. So come to see video and learn this simple technique how to create a Photoshop shapes – circles.

Finally, we attach a few examples of what we created with this Adobe video Photoshop tutorial – Circles shapes.

www.tutorialpsd.net

At the start of this

Photoshop video tutorial

We would like to warn you to not to use photo where there are very significant defects on the skin / acne, rashes, scars, … /. In this lesson, we will not use Photoshop tools Healing brush and Patch, which are necessary to remove them for treatment of the skin we can use Photoshop filter High pass, which will form the basis of the whole retouching. This filter does not repair any significant defects – acne, spots, etc. – so that is the reason for warning you when selecting photos. In the next section of this

Photoshop video tutorial

- How to use layer masks in retouching, we will use the Brush tool. We use soft white brush with varying opacity. You can adjust image by using layers – Curves and Hue / Saturation. For each layer mask is applied . This

Photoshop video tutorial

Is quite simple, but resulting effect is excellent. It is a really quick way to successfully retouch facial skin. Video instruction is treated in great detail. Even beginners do not need to worry and they can also try the manual.

We attach a few images that have been modified by this adobe Photoshop video tutorial – How to use layer masks in retouching. In one example, you will see what result can be achieved in treatment of skin with distinctive rash. So you can come watch and learn this Photoshop lesson.

www.tutorialpsd.net

At the start of this lesson we should say a little bit about Photoshop filter

Motion blur.

All Photoshop filters Blur softens pixels and smearing them. Motion blur smears pixels in the direction of your choice. We can say that in case of computer graphics it is an artistic filter, which simulates, in images, the effect of motion blur determined by angle. Photoshop tutorial is very simple and fast. Possibilities of using filter

Motion blur

. We apply the layer mask and after that we will use a Photoshop Brush tool. We will use soft white brush with opacity 50% and in our case we paint through the waves to achieve the desired effect. If you make a mistake, simply switch the foreground colour to black, and repair needed place. Photoshop video instruction

Motion blur

Is very simple and we definitely recommend it for beginners as well.

Finally, we attach a picture that we have adjusted by today’s video instruction – Using Photoshop filter Motion blur.

www.tutorialpsd.net

When creating a grunge look it would be good to use a photo that looks like from the sixties / but this is not condition /. We can say, that effect looks very good on these kind of images. In the first part of this

Photoshop video tutorial

- Grunge look, we used several Photoshop filters to create this effect – Ripple, Diffuse, Gaussian Blur, and Splatter. After gradually applying these filters we use Photoshop Eraser tool. We will use Photoshop eraser tool to clean important areas like the face, extremities. We leave contours blurry, it then adds the necessary image appearance. In the second part of this

Photoshop video tutorial

- Grunge look we have to continue with adjusting this picture so the overall effect is intensified. It is colour adjustment by using Selective colour, changes blend modes, and so on. You can obviously see detailed processing in adobe

Photoshop video tutorial

If you are looking for an interesting effect to your photos, be sure to try this effect of Grunge look.

Finally, we attach images that were created by today’s Adobe Photoshop video tutorial – Grunge effect. This is a lesson with a nice overall effect and therefore you should have a look at it.

www.tutorialpsd.net

Quick

Photoshop tutorial,

In which we use a new adjustment layer – Black and White. We change the blending mode to Soft Light. We will use the hand tool and by dragging to the left or right you can adjust desired colour. As we already said at the beginning of this

Photoshop tutorial

There are many ways how to create a contrast picture with blurred image. This Photoshop tip can greatly speed up the work and save your time. The entire lesson is treated in detail and is very easy and we definitely recommend it for beginners as well. On these pages we have brought other

Photoshop Tutorial

On this theme – Contrast photo. Make sure you look and compare these methods and choose the most advantageous for you. Certainly we will return to this issue in the near future and we will provide some other video tutorials.

In conclusion, we attach a photo, which was modified according to this Adobe video Photoshop tutorial – Contrast photo. Watch this video instruction.

www.tutorialpsd.net

Some similar

Photoshop tutorials

On the topic of colour changes of selected object, have already been shown on these pages. This guide is easier for that we do not need to select object with some of Photoshop tools – for example pen. We’ll create a new adjustment layer – Hue / Saturation. We will change the colour settings – choose blue. Then we take Colour Picker tool, hold down SHIFT and click gradually on all shades of colour that we want to change. Furthermore, under this

Photoshop tutorial

- Change colour, we take Hue slider and use it to choose the colour of what we need. Any repairs will be done with the Colour picker plus or minus. We would like to note that with the colour change it can sometimes change colour of other objects. At the end of this

Photoshop tutorial

You can see how we can repair this error with using the Brush tool. Photoshop tutorial is very simple and fast and we recommend it for beginners as well.

Finally, we enclose a picture, where you will see which colour changes can be made according to this Photoshop tutorial. Be sure to see today’s video and learn this quick Photoshop technique.

www.tutorialpsd.net

To work on today’s Photoshop instruction

Effect of rain

You will need to choose darker picture. The basis of this work will be the use of Photoshop filters Noise and Motion Blur. With them we create a layer which will develop the

Effect of rain.

Then we will duplicate this layer and with using Free Transform we are turning one of them to create the illusion of rain depth. We apply transformation to the first layer as well and it is because we need to remove the unsightly edges that remain after applying Photoshop filter. At the very end of this adobe Photoshop video instruction

Effect of rain

We create a new layer. This layer will be used for placement of tiny droplets, generated by the rain that falls on the subject / area /, from which it bounced off. We use Photoshop brush tool. First, we set parameters of the brush and then we paint, in our case, parts of the hands where this effect should occur. This Photoshop video tutorial is elaborated in detail and each step is explained. Make sure you do not miss it.

Finally, we attach an image that we created with the help of this Photoshop video lesson – Effect of rain.

www.tutorialpsd.net

Photoshop tutorial

- Effect of bronzed portrait is dealing with quite an interesting change of face colour and by adding Photoshop Noise filter we create an effect which is quite close to the comic effect /you can find out several lessons on these pages/. In essence, this

Photoshop tutorial

Is all about experimenting and creating new, interesting look. In a case of this effect it is not to create a tan skin effect as title might seem to say. Photoshop lesson is simple, elaborated in high detail and we recommend it for beginners as well.

Finally, we enclose a picture that we have created with this adobe video Photoshop tutorial – Effect of bronzed portrait. See this simple video instruction.